American mining fatalities lowest on record

February 8, 2020 Mining Editor

There were 24 mining fatalities in the United States of America in 2019, the U.S. Mine Safety and Health Administration (MSHA) reports. This is the fewest annual fatalities ever recorded, and only the fifth year in MSHA’s 43-year history that mining fatalities were below 30. MSHA is still reviewing two cases of possible chargeable fatalities which, if added would make the total in 2019 the second lowest number of fatalities ever recorded.

There were four deaths each in the states of Kentucky and West Virginia; two each in Pennsylvania, Tennessee and Texas; and one each in Georgia, Idaho, Illinois, Louisiana, Minnesota, Mississippi, New Mexico, Oklahoma, South Carolina, and Vermont.

“The low number of mining deaths last year demonstrates that mine operators have become more proactive in eliminating safety hazards. But I believe we can do even better,” said Assistant Secretary for Mine Safety and Health David G. Zatezalo. “A disproportionate number of mining deaths involved contractors, and we saw an uptick in electrocution accidents, with three deaths and another two close calls. In response, the Mine Safety and Health Administration launched a targeted compliance assistance effort, visiting thousands of mines to educate miners, operators and contractors on procedures that could prevent accidents like these.”

After a two-year increase in 2017 and 2018, when about half of all deaths resulted from vehicle-on-vehicle collisions, failure to use a functioning seat belt and conveyor belt accidents, MSHA responded with a multifaceted education campaign and initiated rulemaking. In 2019, the percentage of deaths caused by powered haulage accidents dropped to approximately 25% of all mining deaths.

READ RELATED

MSHA collected 147,500 samples from coal and metal/nonmetal mines in 2019, a record high. The data revealed an all-time low for average concentrations of respirable dust and respirable quartz in underground coal mines, and the exposure to dust and quartz for miners at the highest risk of overexposure hit all-time lows as well. Metal/nonmetal mines achieved the second lowest average respirable dust and quartz concentrations since 2009. Metal/nonmetal mines also achieved the second lowest average elemental carbon concentration and average total concentration since 2009.

Approximately 250,000 miners work in around 12,000 metal/nonmetal mines in the U.S., while approximately 83,000 work in around 1,000 coal mines. In 2019, MSHA conducted 37,471 inspections at nearly 13,000 mines employing 330,000 miners, which resulted in 99,663 citations and orders. MSHA inspected all underground mines at least four times in 2019, and it inspected surface mines and facilities at least twice, as required by law.

MSHA said it works to prevent death, illness and injury from mining and promote safe and healthful workplaces for U.S miners. MSHA carries out the provision of the Federal Mine Safety and Health Act of 1977 as amended by the Mine Improvement and New Emergency Response Act of 2006. The agency develops and enforces safety and health rules for all U.S. mines regardless of size, number of employees, commodity mined or method of extraction. MSHA also provides technical, educational and other types of assistance to mine operators. MSHA works cooperatively with industry, labor, and other federal and state agencies to improve safety and health conditions for all miners in the United States.

Read more Mining Safety News

Previous Article
Tell-all interview exposes failures in Queensland mining industry safety
Tell-all interview exposes failures in Queensland mining industry safety

AMSJ spoke to veteran mining engineer, company director and mining safety advocate Dr Ray Parkin OAM regard...

Next Article
Glencore Ravensworth Light Vehicle Incident
Glencore Ravensworth Light Vehicle Incident

Last week we reported a light vehicle incident at the Glencore Ravensworth mine. The NSW Resources Regulato...