Dangerous incident: Small Fire

December 21, 2017 Tara

Summary: A small fire was reported on a contractor’s shotcrete machine. The fire occurred in the electrical (24 volt) componentry on the left-hand side of the machine and was extinguished using the aqueous film forming foam (AFFF). There was minimal damage to the machine and nobody was injured.

Recommendations to industry: All mine operators should review their procedures associated with the introduction to site of contractor’s equipment. All contractors should review how their equipment is maintained in a compliant state.

Previous Article
Dangerous incident: Steel falls 2m into drill deck operators cab
Dangerous incident: Steel falls 2m into drill deck operators cab

Summary: A hire drill rig had completed drilling a hole as part of a shot pattern and was in the process..

Next Article
Dangerous incident: Fingertip crushed and amputated
Dangerous incident: Fingertip crushed and amputated

Summary: A driller’s index fingertip was crushed and amputated when the door of a blast hole drill rig was ...