Incident | haul truck’s engine caught on fire

January 18, 2021 Mining Editor

NSW Resources Regulator has reported an incident regarding a haul truck caught on fire in an underground metals mine.

According to the report, while driving to the surface park up area, approximately 100 metres from the portal, a haul truck’s engine caught on fire. The haul truck operator saw the flame coming from the exhaust guard. The fire suppression system was initiated, which extinguished the flame.

The mine identified that the ‘O’ ring failed, resulting in the spray of hydraulic oil onto the hot engine components. The Resources Regulator has identified a concerning increase in reports of a fire on mobile plants. Escape of fluids ignited by hot surfaces has been identified as one of the top two causes, along with electrical wiring faults. 

For further information of fires on mobile plant, click website

Read more Mining Safety News

READ RELATED Fire accident destroys loader

MinEx NZ has published a safety alert of a fire loader accident. According to reports, a loader operator noticed smoke while in the cab of a loader. Looking behind him, he saw flames behind the cab.

He removed his seatbelt, called on the radio to a nearby person and upon opening the cab door, flames lapped at the top of the steps.

He reacted quickly and jumped through the flames to the ground. Another employee came to assist with a fire extinguisher, but the flames were too high, and they evacuated the area.

Luckily, no injuries were sustained. Mobile equipment fires can spread quickly, and it is important to identify where your nearest exit is in the event of a fire.

MinEx data on incidents with the potential to cause harm over the 33 months to March 2020 show 3% of all incidents (92 incidents) result from fires, most of which involve mobile equipment.

MinEx NZ states recommendations:

  1. You review procedures for dealing with mobile equipment fires. It may be appropriate to evacuate rather than try to put the fire out.
  2. Appropriate firefighting equipment is always readily accessible.
  3. You identify where the easiest exit is from plant and equipment in the event of a fire.
  4. Prestart and maintenance checks on mobile plant include checks for fire ignition sources such as bird’s nests, rags, oil leaks etc.

Previous Article
Explosion in truck cabin in underground mine
Explosion in truck cabin in underground mine

Queensland Resources Safety & Health has released an incident report regarding a mine worker being seriousl...

Next Article
Updates to the WHS Regulations come into effect in SA
Updates to the WHS Regulations come into effect in SA

A number of changes to the Work Health and Safety Regulations 2012 (SA) come into effect on 1 January 2021....