New Technical Reference Guide for Escape Breathing Apparatus

October 18, 2020 Mining Editor

The NSW Resources regulator has published a new guide on Escape Breathing Apparatus including self rescuers. The Technical reference guide (TRG): Escape breathing apparatus for underground mining applications (Standards for design and ongoing monitoring) 

The new document updates and supersedes previously published MDG 3609.

The document references the requirements laid down in AS/NZS1716:2012:Respiratory protective devices and  BS EN 13794:2002: Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking.

According to to the NSW Mine Safety regulator “Under the new TRG, in-service testing of self-rescuers can be carried out up until the manufacturer’s recommended service life, whereas under MDG 3609 units had to be discarded in years 8 or 10 depending on the type of apparatus.”

“This change aligns with the United States approach where a service-life plan – reviewed and certified by the Mine Safety and Health Administration and the National Institute for Occupational Safety and Health – must be provided to the purchaser specifying the maximum number of years the unit may remain in use” the regulator confirmed.

A new escape breathing apparatus design order, which references the new TRG, was published in the NSW Government Gazette of 9 October 2020.

READ RELATED

Breathing Apparatus in Mining | Don’t Hold your breath

Self Rescuers recalled by Mine Safety Regulator

To the Rescue | A Case Study on Mines Rescue at Golden Grove

Under the design order, manufacturers of Escape Breathing Apparatus and Self rescuers must have the products tested by the Mine Safety Technology Centre or an approved NATA Lab. All test facilities must be independent to the designer, manufacturer or supplier of the equipment

The suppliers of escape breathing apparatus must not release products to the mining industry until a certificate of compliance for the approved/certified rated duration has been obtained.

The regulator has re-inforced “Where a supplier intends to sell units of a particular model made in a particular year and does not already have a certificate of compliance for these units, the supplier must submit at least 1% to a test authority for examination and testing. The testing authority must issue a test report and may issue a certificate of compliance to the supplier.”

The NSW Mine Safety Regulator has also published a fact sheet that provides information about a mine operator’s obligations to ensure breathing apparatus is maintained in good working order to minimise risk to the user and how this requirement can be met through maintenance, examination, and testing of in-service breathing apparatus.

Read more Mining Safety News

Previous Article
Opal miner found dead in shaft
Opal miner found dead in shaft

An opal miner has received fatal injuries whilst working in the shaft of an underground opal mine. Attempts...

Next Article
Breathing apparatus in mining | Don’t hold your breath
Breathing apparatus in mining | Don’t hold your breath

Food, clothing and shelter may be the basic needs of humankind, but they pale in comparison to our most ess...