Australasian Mine Safety

Australasian Mine Safety Autumn 2011

Australasian Mine Safety is the leading voice for all key decision makers within Mining company's and major contractors. Delivering the latest industry news as it breaks.

Issue link: http://ebook.aprs.com.au/i/29218

Contents of this Issue

Navigation

Page 39 of 119

MINVENT SOLUTIONS Minvent Solutions combines a team of diversified and experienced personnel, committed to providing total customer satisfaction. Coal mining applications, fire retardant anti static fabric, re-usable, can be inflated with mine compressed air, electric blower or bottled air. The most effective stopping/ seal or brattice/wall on the market. Will adhere to irregular shapes and sizes, can be applied to horizontal and vertical applications. Convergence tolerant allowing the stopping to yield with the ground whilst maintaining a competent seal. EPASS (Emergency Personnel Access Safety System) We specialise in developing, implementing and maintaining solutions to mining, industrial and environmental companies globally. Our core competencies are in the fields of designing, manufacturing and servicing. Products and services include, but are not limited to; • Overhead Protection Systems (OPS) • Underground Mine Ventilation Controls (VCU) • Shaft Plugs and Seals • Ore and Waste Pass Plugs and Seals • ROM Grizzly Maintenance Protection Systems • Refractory (overhead protection) Maintenance Systems • • Project Management, Supervision and Training Design, Installation, Commissioning and after sales services. Our unique and diversified products will save you money; days can be reduced off your shutdown schedule through a combination of safe, effective and time efficient products and services. Cost will be reduced through rapid deployment of systems to get you repairing and replacing critical components, zero exposure to personnel, protects your valuable infrastructure and investments. VentStop VCU (ventilation control unit) Suitable for primary and secondary ventilation systems. Decline/incline, drives and draw points, can prevent recirculation from your stope block, ventilation surveys, control radiation dust, fumes and blast gasses. Will not crack and maintains a quality seal even with convergence. 34 AUSTRALASIAN MINE SAFETY JOURNAL A unique inflatable safety system, with a personnel access tunnel through the centre of the unit. Back and front sealed zip entry/ exit doors to facilitate a positive air pressure environment within the access tunnel, suitable for refuge in a smoked out environment, fire fighting, and Mines Rescue Safe Zone. Easily transported for rapid deployment and is re-usable many times over. OPS (Overhead Protection Systems) are without a doubt, the safest, most efficient and cost effective form of protection for personnel and infrastructure available today. Specifically designed to suit onsite requirements, for mine shafts, raise-bores, ore/waste passes crusher and surge bins just to name a few. These inflatable, re-usable systems can be operational in less than two hours eliminating the requirement for extensive backfilling, pouring of solid/semi solid plugs that are required to be blasted out post use. Our systems eliminate the risk involved when personnel are required to go into an area where there is a likelihood of debris striking them from above and the possibility of major and /or fatal accidents resulting as a consequence of that exposure. The systems are designed to apply positive pressure on all surfaces within the subject area, thus preventing Free Fall of Materials and completely eliminating the hazard. Minvent Solutions Patented OPS is available as a single or in multiple units, in heavy duty PVCs, fire retardant and anti static fabrics can be designed to fit most application requirements, is available with a comprehensive audible/visual alarm system with at point of activity monitoring. Systems are also available with open central access and positive or negative pressure venting sleeves to remove dust, gasses and hot air in the working area below the OPS. Talk to us about our full product range and services. Minvent Solutions locations: Minvent Solutions 115 Broadway, Bassendean, WA 6054 Tel: +61 8 9377 1129 Fax: +61 8 9377 1164 minvent@iinet.net.au www.minvent.com.au Mt Isa Mining Supplies 99 Duchess Rd Mt Isa QLD 4825 Tel: +61 7 4743 4288 Fax: +61 7 4749 401 sales@mountisaminingsupplies.com.au www.mountisaminingsupplies.com.au

Articles in this issue

Links on this page

Archives of this issue

view archives of Australasian Mine Safety - Australasian Mine Safety Autumn 2011